rm

Minitel_SM.ino

@@ -1,296 +0,0 @@
-#include <SoftwareSerial.h>
-#include <Minitel.h>
-
-Minitel m(52,53);			//Definition pour le Serial du Minitel
-
-void saisieNum(char *num);
-void saisiePin(char *pin);
-void saisieTxt(char *txt);
-void send_AT_cmd(const char *at_cmd, char *at_rep);
-void send_sms();
-void read_sms();
-void enter_pin();
-
-// CAYE PAS BIEN ET JMEN FOUT !
-char rep[512];
-char Operator[50];
-//char Signal[];
-
-
-void setup()
-{
-	/****Init Shield GPRS Hardware0617827300 mode*****/
-	Serial.begin(19200);
-	Serial1.begin(19200);
-	/****Simulation ON/OFF*****/
-//	pinMode(8, OUTPUT);
-//	digitalWrite(8, HIGH);
-	char mess_ok[50];
-	m.clearScreen();
-	m.textMode();
-	m.bgColor(RED);
-	m.textColor(WHITE);
-	m.text("         Smartphone Minitel V1         ", 1, 1);
-	m.bgColor(BLACK);
-	/**** check du pin *****/
-	send_AT_cmd("AT+CPIN?\r", rep);
-	Serial.println(rep);
-	if (strstr(rep, "READY") == NULL) {
-		m.text("[ ] Check for pin lock... ", 2, 3);
-		m.text("Enter PIN code : ", 2, 4);
-		enter_pin();
-
-	}
-	m.text("[*] PIN code is good ! ", 2, 3);
-
-	m.text("[ ]", 2, 5); 
-	m.blink();
-	m.text("Waiting for Auth Network .....", 6, 5);
-	
-	send_AT_cmd("AT+COPS?\r", rep);
-	Serial.print(rep);
-	char *token, *endtoken;
-	token = strchr(rep, '\"');
-	token++;
-	endtoken = strchr(token, '\"');
-	*endtoken = '\0';
-	sprintf(mess_ok, "You are connected to %s", token);
-//	strcpy(mess_ok, "You are connected to ");
-//	strcat(mess_ok, token);
-	sprintf(Operator, "Operator : %s", token);
-	m.noBlink();
-	m.text("[*]", 2, 5);
-	m.text(mess_ok, 6, 5);
-//	delay(2000);
-	send_AT_cmd("AT+CGREG?\r\r", rep);
-	Serial.print(rep);
-	
-//	delay(1000);
-
-
-}
-
-void loop()
-{
-
-	m.clearScreen();
-	m.textMode();
-	m.bgColor(RED);
-	m.text("         Smartphone Minitel V1         ", 1, 1);	
-	m.textColor(WHITE);
-	m.bgColor(BLACK);
-	m.text(Operator, 1, 23);
-	m.text("1 - Send SMS", 4, 5 );
-	m.text("2 - Read SMS", 4, 6 );
-	m.text("5 - Adress Book", 4, 8 );
-	
-
-	
-	while(1) {
-		if(m.available()>0) {
-			char key = NULL;
-			// Obligation de lire 2 buffer en cas de touche Menu
-			key = m.getKey();
-			switch(key) {
-				case '1':
-					send_sms();
-					break;
-				
-				case '2':
-					read_sms();
-					break;
-			}
-		}
-	}
-	
-	delay(1000);
-
-	
-}
-
-void enter_pin()
-{
-	char pin[5];
-	char at_pin[12];
-	saisiePin(pin);
-	sprintf(at_pin, "AT+CPIN=%s\r", pin);
-	Serial.print(pin);
-	send_AT_cmd(at_pin, rep);
-	send_AT_cmd(at_pin, rep);
-	Serial.print(rep);
-	return setup();
-	
-}
-
-void send_sms()
-{
-	
-	m.clearScreen();
-	m.textMode();
-	m.textColor(WHITE);
-	m.bgColor(RED);
-	m.text(" Send SMS ", 4, 1);
-	m.bgColor(BLACK);
-	m.text("Number : +", 1, 4);
-	m.cursor();
-	m.moveCursorTo(12,4);	
-	
-	
-	char num[20];
-	char txt[160];
-//	char *cmgs = "AT+CMGS=\"+";
-//	char *endcmgs = "\"";
-	char cmdcmgs[100];
-	
-	
-//	strcpy(cmdcmgs, cmgs);
-//	Serial.print(cmdcmgs);
-//	send_AT_cmd("AT+CGATT?\r");
-	saisieNum(num);
-	saisieTxt(txt);
-//	Serial.print(num);
-//	strcat(cmdcmgs, num);
-//	Serial.print(cmdcmgs);
-//	strcat(cmdcmgs, endcmgs);
-	send_AT_cmd("AT+CMGF=1\r", rep);			//Mode texte pour SMS
-	delay(100);
-	sprintf(cmdcmgs, "AT+CMGS=\"+%s\"\r", num);
-	send_AT_cmd(cmdcmgs, rep);
-	send_AT_cmd(txt, rep);
-		
-	delay(1000);	
-	
-	return loop();
-	
-}
-
-void read_sms()
-{
-	m.clearScreen();
-	m.textMode();
-	m.textColor(WHITE);
-	m.bgColor(RED);
-	m.text(" Read SMS ", 4, 1);
-	m.bgColor(BLACK);
-	
-	send_AT_cmd("AT+CMGL=\"ALL\"\r", rep);
-	Serial.println(rep);
-	
-	return loop();
-
-}
-
-
-void saisieNum(char *num) {
-	int strCount = 0;
-	
-	while(1) {
-		if(m.available()>0) {
-			char key = NULL;
-			// Obligation de lire 2 buffer en cas de touche Menu
-			key = m.getKey();
-			if(key != NULL) {
-				if (m.isMenuKey() == true) { 
-					key = m.getKey();
-					if (key == '8') {
-						/**** AJOUTER LE CHAR FIN DE COM MANDE AT PUIS PASSER SAISIE MESSAGES ****/
-						num[strCount]='\0';
-						return;
-					}
-				}
-				else {
-					m.textChar(key);		//print sur minitel
-//					Serial.print(key);		//print sur le prompt
-					num[strCount] = key;
-					strCount++;
-					strCount%=19;
-
-				}
-			}
-		}
-	}
-}
-
-
-
-void saisieTxt(char *txt) {
-	int strCount = 0;
-	m.text("Message : ", 1, 6);
-	m.moveCursorTo(1,7);
-	/*** COMMANDE ATM ***/
-	while(1) {
-		if(m.available()>0) {
-			char key = NULL;
-			// Obligation de lire 2 buffer en cas de touche Menu
-			key = m.getKey();
-				if(key != NULL) {
-				if (m.isMenuKey() == true) { 
-					key = m.getKey();
-					if (key == '8') {
-						txt[strCount]='\x1a';
-						txt[strCount+1]='\r';
-						txt[strCount+2]='\0';
-						return;
-					}
-				}
-				else {
-					m.textChar(key);
-					txt[strCount] = key;
-					strCount++;
-					strCount%=159;
-					
-				}
-			}
-		}
-	}	
-}
-
-
-
-void saisiePin(char *pin) {
-	int strCount = 0;
-	
-	while(1) {
-		if(m.available()>0) {
-			char key = NULL;
-			// Obligation de lire 2 buffer en cas de touche Menu
-			key = m.getKey();
-			if(key != NULL) {
-				if (m.isMenuKey() == true) { 
-					key = m.getKey();
-					if (key == '8') {
-						/**** AJOUTER LE CHAR FIN DE COM MANDE AT PUIS PASSER SAISIE MESSAGES ****/
-						pin[strCount]='\0';
-						return;
-					}
-				}
-				else {
-					m.textChar('*');		//print sur minitel
-//					Serial.print(key);		//print sur le prompt
-					pin[strCount] = key;
-					strCount++;
-					strCount%=19;
-
-				}
-			}
-		}
-	}
-}
-
-
-void send_AT_cmd(const char *at_cmd, char *at_rep)
-{
-	Serial1.print(at_cmd);
-	int strCount = 0;
-	Serial.println(at_cmd);
-	delay(100);
-	while(Serial1.available()>0) {
-		char reponse = Serial1.read();
-		at_rep[strCount] = reponse;
-		strCount++;
-	}
-	
-	
-	at_rep[strCount]='\0';
-	delay(1000);
-}