|
@@ -29,20 +29,7 @@ pip install pysstv
|
|
|
Should have a Serial interface on **GPIO14**(UART0_TXD) and **GPIO15**(UART0_RXD).
|
|
|
I'm using a cheap FTDI232, from anywhere.
|
|
|
|
|
|
-### Enable secondary UART port
|
|
|
-
|
|
|
-/!\ This step don't works, should not use it ! /!\
|
|
|
-
|
|
|
-Should add this config parameters to `/boot/config.txt` :
|
|
|
-```
|
|
|
-dtoverlay=disable-bt
|
|
|
-dtoverlay=uart1,txd1_pin=32,rxd1_pin=33
|
|
|
-force_turbo=1
|
|
|
-enable_uart=1
|
|
|
-```
|
|
|
-Now we ~~can~~ use **GPIO12** and **GPIO13** for a secondary serial port
|
|
|
-
|
|
|
-### Switch the output soundcard to GPIOs
|
|
|
+### Switch the output jack of the soundcard to GPIOs
|
|
|
|
|
|
We have to play WAV files from the PySSTV converter, and put it directly in the microphone +/- input of the SA828 radio module.
|
|
|
|
|
@@ -58,3 +45,9 @@ dtoverlay=audremap,pins_12_13 # for pins 12 and 13
|
|
|
|
|
|
### chroot-to-pi.sh script
|
|
|
Use this script to chroot your system on another system.
|
|
|
+
|
|
|
+### Launch the full process
|
|
|
+
|
|
|
+```
|
|
|
+run-parts ./process/
|
|
|
+```
|